Eco-Friendly Certified Safety Surfacing for Children's Play Areas

#ChildrensPlayground #WaterPlayground #Park #EcoFriendlyCertification #TechnicalCertification #IndustryStandard #SPS-KSSFIA1-1944_2017 #ImpactAbsorbingFlooring Type 1

FUNSCAPE's safety surfacing for children's play facilities is installed in playgrounds, parks, and other recreational areas to ensure the safety of users (children). In particular, our products are completely free of hazardous substances and heavy metals. By utilizing eco-friendly materials that exceed regulatory standards, we simultaneously deliver exceptional aesthetics and user safety. Furthermore, FUNSCAPE's safety surfacing is an environmentally sound product combining high-elasticity rubber chips with specialized polyurethane binders, ensuring a clean and safe environment for parks, playgrounds, multi-purpose sports courts, and athletic tracks. It also maintains long-lasting cushioning, serving as an all-weather resilient surface for pedestrian walkways, jogging tracks, promenades, and fitness centers. It provides a lightweight stride for all ages, reduces fatigue, minimizes joint impact and injury risk, and contributes substantially to public health as a superior, wellbeing-focused floor finish system.

# Eco-Label Certified Product Certification Reason: Improved Resource Recyclability & Reduction of Hazardous Substances", Consumer Information: 1) Product Use: Elastic Surfacing for Children's Play Facilities, 2) Eco-Friendly Information: Eco-Friendly Elastic Surfacing

Impact-Absorbing Flooring Type 1 / SPS-KSSFIA1-1944

This product is certified under Industry Standards and holds Eco-Label Certification. Manufactured using eco-friendly materials to deliver outstanding elasticity, it conforms to KATS Industry Standard Type 1. The eco-friendly safety surfacing is applied over concrete or asphalt substrates. During installation, a dedicated primer is applied to maximize adhesion, followed by a secondary resilient base layer composed of rubber granules and binder. After curing, a dual-layer system is completed by pouring the top EPDM or polyurethane color wear layer. A proprietary admixture formulated by FUNSCAPE is used to prevent yellowing caused by UV exposure. Offering superior impact absorption, it is primarily used in children's playgrounds and public parks. Additionally, this product is supplied under the condition of passing both environmental safety inspections for children's activity zones and official installation inspections in accordance with the Children's Play Facilities Safety Control Act.

#ChildrensPlayground #EcoFriendlyCertification #IndustryStandardCertification #BiotopAreaRatio #SPS-KSSFIA1-1944 #Type1 #EcoLabelCertification

G2B Identification Number	Model Name	Price (per m²)	Specifications	Certification
23686938	FUN-45, Type 1	106,000원	Base Cushion Layer 30T + Color Wear Layer (EPDM) 15T, Total Thickness = 45 mm
23108244	FUN-50, Type 1	109,400원	Base Cushion Layer 35T + Color Wear Layer (EPDM) 15T, Total Thickness = 50 mm
23108245	FUN-55, Type 1	112,900원	Base Cushion Layer 40T + Color Wear Layer (EPDM) 15T, Total Thickness = 55 mm
23686939	FUN-65, Type 1	119,800원	Base Cushion Layer 50T + Color Wear Layer (EPDM) 15T, Total Thickness = 65 mm
23108246	FUN-75, Type 1	126,700원	Base Cushion Layer 60T + Color Wear Layer (EPDM) 15T, Total Thickness = 75 mm
23108248	FUN-95, Type 1	147,500원	Base Cushion Layer 80T + Color Wear Layer (EPDM) 15T, Total Thickness = 95 mm

※ Critical Fall Height (CFH) by Model (Reference)

What is Critical Fall Height (CFH)? It is an engineering metric that verifies the adequate impact attenuation performance of an impact-absorbing surfacing material through modeled test drops simulating a user's vertical fall onto the surface, Head Injury Criteria (HIC) refers to the maximum vertical height corresponding to a HIC value of 1000. A higher critical fall height alone does not indicate superior product quality; physical properties including minimum tensile strength and flexural deformation must also be satisfied. The graph on the right is based on test values of our product and may vary depending on on-site conditions (temperature, humidity, base layer type, structural strength, etc.).

The Critical Fall Height shown on the left assumes compliance with standard physical property requirements (tensile strength, elongation rate, tensile stress, etc.). Conversely, an excessively high critical fall height relative to the same thickness may indicate issues such as inadequate compaction during paving or a deficiency of raw materials.

Quality & Toxicity Standards Comparison Table

Download Design Documents

Resilient Surfacing for Water Play Areas

FUNSCAPE's safety surfacing for water play areas is engineered with specialized materials and advanced installation methods. Unlike standard dry playgrounds, water play areas require customized material mix formulations and rigorous construction considerations; improper execution by non-specialized contractors can lead to critical product failures.
Because safety surfacing relies on polyurethane binders, continuous exposure to water can compromise durability, often causing post-installation issues such as delamination, debonding, or surface cracking. To overcome these limitations, FUNSCAPE supplies and installs water play surfacing using proprietary materials and specialized engineering techniques. If you require project specifications and CAD details for water play areas, please submit a "Design Resource Request Form" below.
#ChildrensPlayground #WaterPlayground #WaterPark #SPS-KSSFIA1-1944 #IndustryStandard #Type1

Permeable Safety Surfacing

This product is a resilient and permeable paving system designed to enhance the urban Biotop Area Ratio (ecological area index). While conventional safety surfacing may possess intrinsic porosity, applying it over impermeable base layers like concrete or asphalt limits natural rainwater infiltration. In contrast, this system incorporates a dedicated sub-base over graded aggregate, followed by a primary resilient cushion layer of rubber granules and binder, and an EPDM or polyurethane color wear layer. This structure ensures both exceptional water permeability and structural durability. Service life may vary based on installation expertise and site conditions. If you require special specifications, cross-section drawings, or technical data for permeable safety surfacing, please fill out the Design Resource Request Form below.
#BiotopAreaRatio #ChildrensPlayground #PedestrianWalkway #Park

Model Name	Specifications
FUN-75TL, 75mm	Sub-base Layer 30T + Base Cushion Layer 33T + Color Wear Layer (EPDM) 12T, Total Thickness = 75mm
FUN-95TL, 95mm	Sub-base Layer 40T + Auxiliary Elastic Layer 43 + Color Surface Layer (EPDM) 12T, 85mm

Request a Quote

Request Design Resources

Resilient Surfacing Demolition Guide